Skip to content 
John Deere marine engine maintenance schedule 9.0L (325-550 hp), scheduled Maintenance for Marine Vessels is an important part of owning a boat. Contact Santa Barbara Marine Diesel Mechanic today to schedule inspections, maintenance, repairs. servicing Channel Islands Marina, Ventura Harbor & Santa Barbara Harbor. JOHN DEERE MARINE MECHANIC.
Marine engine maintenance, repairs, service:
Everything that a vessel does, including moving through water, is accomplished by its engine. Scheduled Maintenance for Marine Vessels is important most of all for your boat’s engine. This is because engines and their parts suffer severe wear and tear from natural use over time. There are no two ways about it, any combustion engine or diesel engine of any kind will need repairs and general maintenance to keep operating. A regular inspection and maintenance are crucial to ensure that your vessel stays in tip-top shape. It is essential that you avoid any issues that could result in total and permanent failure of your boat.
John Deere Marine Engine Maintenance Schedule:
Daily:
- Cooling System Coolant Level – Check.
- Engine Air Cleaner Service Indicator – Check
- Engine Oil Level – Check.
- Fuel System Water Separator – Drain.
- Marine Transmission Oil Level – Check.
250 Service hours or Yearly:
- Zinc Anodes – Inspect/Replace.
- Engine Valve Lash – Inspect/Adjust.
- Fuel Injection Timing – Check.
- Seawater pump impeller – Replace.
- Seawater Pump Seals – Inspect
- Seawater System – Flush with Descaling solution.
- Battery Electrolyte Level – Check.
- Belts – Inspect/Replace.
- Cooling System Supplemental Coolant Additive (SCA) – Test/Add.
- Engine Air Cleaner Element – Clean/Replace
- Engine Crankcase Breather – Clean
- Engine Oil Sample – Obtain
- Engine Oil and Filter – Change
- Fuel Inlet Screen – Clean
- Fuel System Primary Filter/Water Separator Element – Replace.
- Fuel System Secondary Filter – Replace
- Fuel Tank Water and Sediment – Drain
- Hoses and Clamps – Inspect/Replace
- Seawater Strainer – Clean/Inspect
- Water Pump – Inspect.
- Reverse Gear Strainer – Clean.
- Replace Crank Case Vent Filter.
1000 Service hours or 2Years:
- Aftercooler Core – Clean/Test.
- Cooling System Coolant (DEAC) – Change.
- Engine Protective Devices – Check.
- Magnetic Pickups – Clean/Inspect.
- Turbocharger – Inspect.
2000 Service Hours or 4 Years:
- Engine Mounts – Inspect.
- Engine Valve Lash – Inspect/Adjust.
- Fuel Injection Timing – Check.
- Governor Oil Supply Screen – Clean/Replace.
- Heat Exchanger – Inspect / Remove/ Descale.
Everything that a vessel does, including moving through water, is accomplished by its engine. Scheduled Maintenance for Marine Vessels is important most of all for your boat’s engine. This is because engines and their parts suffer severe wear and tear from natural use over time. There are no two ways about it, any combustion engine or diesel engine of any kind will need repairs and general maintenance to keep operating. A regular inspection and maintenance are crucial to ensure that your vessel stays in tip-top shape. It is essential that you avoid any issues that could result in total and permanent failure of your boat.
NOTE: These are John Deere periodic maintenance suggestions strait out of the service manual. Some of these seem excessive to me such as adjusting the valve lash or adjusting the injection timing every 250 hours. here at Santa Barbara Marine Diesel Mechanic, we can customize your diesel engines periodic maintenance to fit your needs.
OILSCANTM or OILSCAN PLUSTM is a John Deere
sampling program to help you monitor machine.
performance and identify potential problems before
they cause serious damage. OILSCANTM or OILSCAN
PLUSTM kits are available from your John Deere dealer.
Oil samples should be taken prior to the oil change. Refer
to instructions provided with kit.
